Portable Dead weight Anchor System for fall arrest, travel restraint, Rope Access up to 2 workers with "D" ring.

Weightanka® is a mobile, dead weight anchor device for use on roofs of up to 5 degrees pitch, where the absence of guardrails or permanent anchor devices would otherwise preclude safe means of access. Weightanka® is the first Class "E" anchor device to be approved for use on all roof surfaces when wet and also for use downhill on metal clad roofs (subject to the addition of two extra weights). Weightanka® utilises a central pedestal (attachment point) which raises the height at which the arrest force is applied, thus reducing the distance the anchor device moves during a fall arrest event. 'Kee' Features and Benefits of Weightanka® Features Independently tested at N.E.L. (National Engineering Laboratory, East Kilbride N.B. 0320) Conforms to CLASS E EN 795, BS 7883 & ISO 14567 CE Approved to PPE Directive Galvanized to BS EN ISO 1461 Does not penetrate the roof surface Base weights fully encased in rubber moulding, with 10 year guarantee Raised central pedestal reduces the distance of travel during a fall arrest event. Benefits No need for expensive Inertia reels Rubber moulded base weights prevent rubber pads ‘peeling’ at the edges With the correct model it can be used on any of the following roof surfaces in WET or DRY conditions: Single Ply Membrane, Asphalt , Steel Cladding, Concrete, Stone Chippings (Brushed) or Mineral Felt Can be used on roofs up to 5° pitch For fall restraint up to 2 workers may be attached providing they cannot get to less than 500mm from the edge Easy and quick to assemble with fewer loose components than others on the market.