First Aid CPR -AED

  Call toll free: 1-877-896-7233      sales@dcis.ca

#TS/VR-55000: Vertical ladder fall arrest rail aluminum

$16.05

Vertical Ladder Safety Rails priced per foot includes ladder mounting brackets, standard sections 20 feet long also available in 10 foot sections or cut to length. Cutting fees may apply

APPLICATION REQUIREMENTS -MODEL 55000 IS DESIGNED FOR USE IN PERMANENT INSTALLATIONS. THE RAIL HAS BEEN DESIGNED TO SUSTAIN A DYNAMIC LOAD OF 5000lbs. WHEN USED IN CONJUNCTION WITH A TSG 25000L, 25010L, 25100L, 25110L, 25700L OR 25710L TROLLEY. THE SYSTEM IS CERTIFIED TO CSA Z259.2.1-1998 CLASS “FRL” AND MEETS OSHA REGULATION (1910.27) AND ANSI REGULATION A14.3-1984. -THE RAIL CAN BE ROLL FORMED TO A FIVE (5) FOOT RADIUS (CUSTOM FALL ARRESTER IS REQUIRED) BOTH CONCAVE AND CONVEX. -THE RAIL HAS BEEN DESIGNED TO BE MOUNTED BOTH VERTICALLY AND HORIZONTALLY.

VERTICAL INSTALLATION: -Tool required to install the support clamps and or the splice brackets: 9/16" Wrenches and Torque Wrench. -Torque 3/8"-16 Bolt assemblies dry no lubricants to 30ft.lbs..

General Information The 55000 Vertical Safety Rail should only be used with the TSG 25000L, 25010L, 25110L, 25100L, 25700L or 25710L Trolley and a full body harness equipped with a >L= Dee ring for attachment to the trolley. The worker must also be equipped with an energy absorbing lanyard so that in the event that the worker must work position or leave the Safety Rail System the worker may maintain 100% fall protection. The Safety Rail System must only be used by qualified, competent and trained workers. Should a fall occur, and the worker is injured or unable to perform a self rescue the Safety Rail System may be used by rescuers to perform the rescue. The TSG Trolley moves freely along the TSG Safety Rail System and follows the worker with little resistance.


Add to Cart:


This product was added to our catalog on Thursday 24 September, 2009.

CAFC

NFPA

EDA

Red Cross Authorized Provider

Copyright © 2007 - 2014 DCIS Inc. Powered by Zen Cart